Desilter Cleaner

BW-CNQ series desilter is the third phase solids control equipment to treat the drilling fluids, and improve the performance of drilling mud, can combined with desander cleaner. The most common cone is ”4 or 5” , mainly separate size of 15-47μm solids particles out from drilling fluids. According to clients’ treating capacity can choose the number of cones.

Desilter Cleaner

Features & Benefits of BW Desilter Cleaner 
1. Adopt ANSNy limited elment analysis, optimize structure.
2. Heat treatment on complete deck, grinding sand, pickling phosphating and hot dip galvanizing.
3. Painting: Heavy anti-corrosion paint adopt national famous Dewei Brand.
4. Vibration motor is form Italy OLI.
5. Electrinic control system if from Huarong brand or Helong brand explosion-proof eletronic switch.
6. High strength compound rubber material used to reduce shocking
7. Cones adopt high wearing-resisting polyurethane and High copy Derrick structure
8. Inlet and outlet adopt fast joint connection

Parameter of Desilter Cleaner

Model	BWCNQ100-4N	BWCNQ100-8N	BWCNQ100-10N	BWCNQ100-12N
Screen area	1.0m²(600x1600mm)
Capacity	≤60m³/h	≤120m³/h	≤150m³/h	≤180m³/h
Cone Size	4"(cyclone each 12~15m3/h)
Cone number	2~12 swirlers，According to the capacity of the selection the swirler
Matching Pump	SB4×3-13J（15Kw)	SB5×4-12J (37Kw)	SB5×4-14J (45Kw)	SB6×5-13J（55Kw)
Inlet Size	75mm-150mm
Outlet Size	125mm-200mm
Separation Size	15-47μm